The PCIe-287N™ network accelerator card delivers the processing and I/O performance required to develop and deploy solutions in a range of application areas including Network Security, Algorithm Acceleration and Signals Intelligence.

Quad SFP+ ports supporting a range of protocols including 10GbE LAN/WAN are directly coupled to two Kintex-7 FPGAs, supported by multiple banks of SRAM and SDRAM. A Gen2 PCI-Express interface provides high-bandwidth connectivity and seamless integration with the host environment.

A comprehensive software and firmware suite is delivered with the product, including optimized memory controller cores, reference designs, card driver and APIs.

The PCIe-287N is compatible with a range of server and blade centre platforms from leading OEMs.

• Form factor - Full-height, full-length PCI Express
  • 4.376 x 9.5 inches (111 x 241mm)
  • Single-slot width
• Host interface
  • 8-lane PCI-Express 2.0
  • Up to 5GB/s total host bandwidth
• Processing
  • 2x Xilinx Kintex-7 K325T user FPGA (Please contact Nallatech for other supported FPGA options)
  • 8-bit single-ended GPIO between user FPGAs
• QDR-II SRAM memory
  • 6 independent 9MByte banks
  • Max. bandwidth per bank: 1.5GB/s
• DDR3 SDRAM memory (fixed)
  • 2x 1GByte bank
  • Max. bandwidth: 7.2GB/s
• PCI backplate interfaces
  • 4x SFP+ ports
  • AMP-QT2225 PHY layer bridge chip, supports 1G and 10G operation
    • 10G operation: 10GbE LAN/WAN and 10GFC
    • 1G operation: 1000BASE-X and 1000BASE-T
  • AMCC interface IP core included.
  • Option of no PHY – provides direct input into GTX ports on FPGA with support for various protocols (appropriate IP required)
  • SMA input to FPGAs for ns accurate time-stamping
  • 3 tri-color LEDs per user FPGA for user designs + 3 card status LEDs
• Application Programming Interface (API)
  • NallaLIB API for 64-bit Linux
  • Runtime FPGA programming, hardware control, and application communication Development and debug software
  • Optional Framework Builder Dev Kit
  • Supports multiple design flows including VHDL and Verilog
  • Compatible with Xilinx ISE and all major synthesis design flows
  • Access to onboard JTAG header for Chipscope and iMPACT

PCIe-287N Product Brief (PDF Format) Download Now

Embedded PCI Series Product Selection Guide (PDF Format) Download Now

Nallatech Support Services Brochure (PDF Format) Download Now

Nallatech FPGA Acceleration Guide (PDF Format)