Nallatech 510T Compute Acceleration Card

Compute Acceleration Card FPGA co-processor – designed to deliver ultimate performance per watt for compute-intensive datacenter applications

The 510T Compute Acceleration Card is a GPU-sized 16-lane PCIe Gen 3 card featuring two of Altera’s new floating-point enabled Arria 10 FPGAs delivering up to sixteen times the performance of the previous generation. Applications can achieve a total sustained performance of up to 3 TFlops.

510T Compute Acceleration Card deliverables include an optimized Board Support Package compatible with the Intel Software Development Kit (SDK) for OpenCL. This allows the card to be programmed at a high level of abstraction by customers unfamiliar with hardware-based tool flows historically required for FPGAs.




  • Up to 3 TFLOPS of peak single precision performance
  • Up to 150 GBytes/s Peak Aggregate Memory Bandwidth
  • Two Arria 10 1150 GX FPGAs
  • 75GB/s Peak DDR4 Memory Bandwidth per FPGA (4 Banks per FPGA)

Looking for FPGA Compute Acceleration with Stratix 10? Check out the 520C


The Nallatech 510T Datacenter Co-Processor is designed to deliver fast and efficient performance per watt.

FPGA computational acceleration has increasingly improved performance in the following markets:

  • Compute, Network & Storage
  • Finance & Risk Analysis
  • Datacenter
  • HPC
  • Communications
  • Industrial, Broadcast
  • Medical
  • Automotive

The 510T Compute Acceleration Card is available with an unprecedented 150GByte/sec of peak external memory bandwidth configured as eight independent banks of DDR4 . This FPGA’s on-chip memory bandwidth of 14.4TBytes/sec, permits dramatic new levels of performance per watt for memory-bound applications.

View All Nallatech FPGA Cards


Datacenter Co-Processor FPGA Compute Acceleration Card

  • GPU Form Factor Card with (2) Arria 10 10A1150GX FPGAs
    • Dual Slot Standard Configuration
    • Single Slot width possible, if user design fits within ~100W power footprint
  • PCIe Gen3 x 16 Host Interface
  • 150 GBytes/s Peak Aggregate Memory Bandwidth
    • 75GB/s Peak DDR4 Memory Bandwidth per FPGA (4 Banks per FPGA)

FPGA Accelerated Compute Node

FPGA Accelerated Compute Node – with up to (4) 520s

520 – with Stratix 10 FPGA

Compute Accelerator Card
w/Stratix 10 FPGA

510T - Compute Accelerator with Arria 10 FPGA

 Nallatech 510T
w/(2) Arria 10  FPGAs

385A - Network Accelerator with Arria 10 FPGA

 Nallatech 385A – w/Arria10 / GX1150 FPGA

Password Reset
Please enter your e-mail address. You will receive a new password via e-mail.